XRV Specifications

The XRV is a performance all terrain offroad buggy. It is suited to most terrains including forest trails & sand dunes.

Power comes from a Vanguard 22hp 627cc motor & transmits drive via a sturdy Comet 90 series torque converter. Final drive is enclosed 530 motorcycle chain.

The XRV has fully independent suspension on all four corners using a single "A" arm design with long travel coil over shocks. Transmission of drive to the two rear wheels is via reliable high angle uni joint shafts.

xrv2000_rear.jpg (50459 bytes)xrv2000_frontright.jpg (52371 bytes)XRV 627:

Another buggy for our No 1 customer in Saudi Arabia. One of a batch of 14 XRV's heading for the vast sand dunes of the Middle East. This is the new generation XRV 627. Set up for the Sahara desert with 22x8x10 Dune Runner "Razorback" front tyres & 22x11x8 paddles on the rear.

Rear braking via a single disc & hydraulic caliper is standard equipment. Steering is via a quick turn rack & pinion giving one half turn from lock to lock.

A high back fibreglass rally type seat & racing spec 4 point harness is standard. Seat slides are standard. The multi braced chassis is finished in a tough powdercoat finish to your choice of colour.

Available powder coating colours:

The XRV's dimensions are as follows:

Overall length - 2540mm ( 100" )
Overall width - 1800mm ( 71" )
Overall height - 1350mm ( 53" )
Track - 1500mm ( 59" ) REAR
- 1500mm ( 59" ) FRONT
Wheelbase - 1650mm ( 65" )
Wheel travel - 350mm (13.7")
Ground clearence - 275 - 300mm ( 11- 12" )
Speed - 75-80 kph ( 50mph )
Approx weight - 300 kg ( 660 lb )

Another buggy ready for a customer.